Konova Slider K5 C3 120CM

User icon
Cart icon 0

Camera Sliders

Konova Slider K5 C3 120CM

  • Excl. Tax: $579.44
  • Incl. Tax: $620.00

 

The 47.2"(120cm) long Konova K5 Slider supports loads up to 50.7 lb(23 Kg) and features roller bearings that provide smooth, stable, and quiet operation. Compared to the K2 and K3 sliders, the K5 Slider features larger bearings and larger 8mm chrome-plated rails, contributing to its increased load capacity while maintaining smooth slides. The slider can be supported using a single tripod or a pair of tripods/stands thanks to 1/4"-20 threads located on the underside of the track, positioned along the center and at either end. Additionally, there are threaded holes on the sides of the slider that enable you to mount it vertically. For ground-level shooting, a pair of height and angle-adjustable legs with rubber ball feet are included that screw into the sides of the slider.

Tags Konova
Share:

This product is temporarily out of stock. You may opt-in our waiting list and we'll notify you once the product is restocked.

 

The 47.2"(120cm) long Konova K5 Slider supports loads up to 50.7 lb(23 Kg) and features roller bearings that provide smooth, stable, and quiet operation. Compared to the K2 and K3 sliders, the K5 Slider features larger bearings and larger 8mm chrome-plated rails, contributing to its increased load capacity while maintaining smooth slides. The slider can be supported using a single tripod or a pair of tripods/stands thanks to 1/4"-20 threads located on the underside of the track, positioned along the center and at either end. Additionally, there are threaded holes on the sides of the slider that enable you to mount it vertically. For ground-level shooting, a pair of height and angle-adjustable legs with rubber ball feet are included that screw into the sides of the slider.

 

The slider carriage features a 3/8"-16 screw for attaching a fluid head or ball head. The resistance of the carriage can be dialed to taste quickly using a red friction adjustment knob, or with more finesse using a wrench to adjust tension. A metric ruler running the length of the slider makes it easy to perform precise and repeatable camera movements. Should you wish to expand the system in the future, you can choose to add an optional crank handle kit or one of the motion controller options.

50.7 lb(23 Kg) load capacity

Three steel bearings provide smooth, stable, and quiet operation

8mm chrome-plated steel rails

Camera carriage with 3/8"-16 screw and two 1/4"-20 threaded holes

Friction-adjustment knob

Tension is adjustable using included wrench

1/4"-20 and 3/8"-16 mounting threads at center and ends of tripods

Mounting threads on side of tripod for vertical mounting

Detachable height and angle-adjustable legs with rubber ball feet

Metric ruler for repeatable movements

1/4"-20 accessory mounting threads at each end of slider

Dual oil seals help keep rails clean from dust and debris

Two bubble levels

Carrying bag

Optional crank handle and motion control upgrade kits

Write a review

Please login or register to review